Air conditioning cleaning machine Tecnosystemi Ultra Vapor

Ultra Vapor - professional device for cleaning and sanitizing air conditioning by steam jets (4 bars, 120°C)

• Professional vapor sprayer Tecnosystemi HCC300003 Ultra Vapor Clean for deep air conditioning cleaning.
• Super compact machine for HVAC maintenance professionals.
• Outstanding mobility, adaptability and flexibility!
• Deep air conditioning sanitation is ensured through the special technology of hot vapors.
• Applicability: indoor AC units, fan coils, filters.
• Tank capacity: 1 liter.
• AC installation cleaning device (230V, 1500 W) equipped with two very intuitive LEDs that indicate the machine's status.
• By activating the green LED on the ultrasteamer, a jet of steam is emitted at 120°C with a pressure of 4 bars.
• Red LED lighting indicates that the Ultra vapor water tank is empty.
• Thanks to the practical shoulder strap, it is easy to carry in any intervention.
• Internal aluminum boiler.
• Cleaning steam is produced within 4-5 minutes of filling and starting the AC cleaner.
• Use for 25 minutes based on one fill.
• Pistol with ergonomic handle with start button.
• Keep out of reach of children; to be used only by persons authorized to maintain HVAC installations and only for the applications specified by the manufacturer!
• Tecnosystemi Ultra Vapor weight: 3 kg.
• Made in Italy.

To thoroughly clean an internal split system, Tecnosystemi recommends proceeding as follows:
1. Disconnect the power supply of the split air conditioning system.
2. Disassemble the front case and remove the filters.
3. Apply the professional protection kit (foil) to the case of the AC unit and adequately cover the electrical parts.
4. Apply the indoor unit coil cleaning solution or spray.
5. After the product has been allowed to work, clean the coil with the Ultra Vapor Clean machine, being careful not to spray the electrical parts.
6. Use filter solution or spray to clean them.
7. Rinse the filters before mounting them on the split system.
8. Reassemble the filters in the split system and attach, if desired, AC air freshener.
9. Remove the professional protective film kit for cleaning the internal split units and remove the protections covering the electrical parts.
10. Discard the resulting dirty water.
11. Reassemble the split system housing.
12. Clean the exterior of the split system and the car remote control with a cloth dampened with AC cleaning/sanitizing solution.
13. Wait until the split system components have dried.
14. Power up the split system again.
15. Start the super-sanitized split air conditioning system this way!