DT-266 ammeter pliers with digital multimeter

DT-266 clamp meter pliers with digital multimeter

Cleste ampermetric DT-266 cu multimetru digital profesional

Ai observat o eroare?

COD DTN

504.40.1100

COD PRODUS

Cleste ampermetric DT-266

CLAMPMETRU DT-266

Solicită ofertă PDF

Digital clampmeter - professional measuring device in the category of multimeters provided with measuring pliers at maximum accuracy

Digital meter with 500V tester included.
DC voltage: 1000V range, 1V resolution, accuracy ± (1.0% of rdg + 5D); Overload protection: 1000V DC or 750V rms for all areas.
Clamp alarm: starts when the resistance is less than 30 ± 20Ω; overload protection: 15 seconds max. 250V rms.
AC voltage: 750V range, 1V resolution, accuracy ± (1.2% of rdg + 5D); frequency range: 45 Hz ... 450 Hz; Overload protection: 1000V DC or 750V rms for all areas.
AC multimeter current: range (a): 200A, 100mA resolution, 50-60Hz accuracy: ± (2.5% +13); range (b): 1000A, resolution 1A, accuracy 50-60Hz: ± (2.5% +8) for 800A or below; in case of reading the data are valid for the reference over 800A; clampmeter overload protection: 1200A in 60 seconds.
Insulation test (with 500V test unit option): 20MΩ range, 10KΩ resolution, accuracy ± (2% + 2); 2000MΩ range, 10MΩ resolution, accuracy ± (4% + 2) for 500 MΩ or below, or accuracy ± (5% + 2) for others.
Clampmeter resistance: range 200Ω, resolution 0.1Ω, accuracy ± (1.0% of rdg + 10D); 20KΩ range, 10Ω resolution, accuracy ± (1.0% of rdg + 4D); maximum open circuit voltage: 3V; overload protection: 15 seconds max. 250Vrms.
Do not apply a higher rated voltage than the digital multimeter.
To avoid electric shock or injury, it is necessary to inspect the housing before each use of the clamp meter. Do not take measurements if it is cracked or if certain components are missing.
The rotating element must be placed in the correct direction, and no field must be changed during the measurement so as not to damage the device.
Direct and alternating current clampmeter with guaranteed accuracy for at least 1 year.
Maximum care must be taken when the clampmeter operates at an effective voltage of more than 60V direct current or 30V rms alternating current, because then the possibility of current is high.
Use the correct terminals, functions, and ranges for your measurements.

Specificații

Observations Husă inclusă (included protective bag). Polaritate (polarity): automată (automatic), indicare minus și asumare plus (indicated minus, assumed plus). Viteza de culegere eșantioane (sampling speed): de 2 ori/sec (2 times/sec). Electricitate statică (static electricity): 4mA. Dimensiuni 9dimensions): 230 x 68 x 37 mm. Greutate netă (net weight). 240 gr.

Tabel comparativ

Clamp meters
Modele	Observations
Cleste ampermetric SC480	°F și °C, menține/max/min, LED de înaltă tensiune, avertizare beeper, tensiune fără contact, LED și semnal sonor, LED de continuitate și semnal sonor, test diodelor, calibrare usoara a temperaturii, microamperi DC specific unui clampmetru DC, frecvența (Hz) prin clemă, gama de ohmi scăzut pentru înfășurările motorului. Pachetul include: SC480, termocuplu ATB1, ASA2 Gater Clip Leads, cabluri de silicon ADLS2, husă căptușită ANC12, sfaturi RCT2 Molex. ( °F and °C, hold/max/min, high voltage LED, beeper warning, non-contact voltage, LED and beeper, continuity LED and beeper, diode test, easy temperature calibration , DC microamps specific to a DC clamp meter, frequency (Hz) across the clamp, low ohm range for motor windings. Digital measuring device with magnetic hanger. Package includes: SC480, ATB1 Thermocouple, ASA2 Gater Clip Leads, ADLS2 Silicone Leads, ANC12 Padded Case, RCT2 Molex Tips.)
Multimetru cu cleste LT17A	Oprire automată: se oprește după 25 de minute pentru a prelungi durata de viață a bateriei. Indicatori: Bip de continuitate (<100 Ω). Baterie descărcată. Depășire a intervalului: Se afișează „OL” sau „-OL”. Mediu de funcționare: 0 până la 50°C (32 până la 122°F) <70% RH. Mediu de depozitare (cu bateriile scoase): -20 până la 60°C (4 până la 140°F) <80% RH. Altitudine: 2000 m (6561,7 picioare). Durata de viață a bateriei: 150 de ore, în mod tipic. Tip baterie: 9V tip NEDA 1604. Precizii declarate: 23°C±4°C (74°F±8°F), 75% RH. Coeficient de temperatură: 0,1 x (precizie specificată) 1°F/°C (0 până la 19°C (32 până la 66°F), 28 până la 50°C (82 până la 122°F)). Intervale de tensiune CC: 200mV, 2000mV. (Auto-off: off after 25 minutes to extend battery. Indicators: Continuity beeper (<100 Ω). Low bat. Overrange: “OL” or “-OL” is displayed. Operating environment: 32 to 122°F (0 to 50°C) <70%RH. Storage environment (with batteries removed): -4 to 140°F (-20 to 60°C) <80%RH. Altitude: 6561.7 feet (2000m). Battery life
Multimetru cu cleste VMC-1	Valori maxime măsurabile cu acuratețe de ±1.0% (max. measured values with ±1.0% occuracy): 600 V, 400 A, 4 mF, -40°C ... 1000°C. Baterii (batteries): 2 x AAA 1.5V. Diametru maxim clampmetru (max. diam. of clamps): 28 mm.
Cleste ampermetric DT-266	Husă inclusă (included protective bag). Polaritate (polarity): automată (automatic), indicare minus și asumare plus (indicated minus, assumed plus). Viteza de culegere eșantioane (sampling speed): de 2 ori/sec (2 times/sec). Electricitate statică (static electricity): 4mA. Dimensiuni 9dimensions): 230 x 68 x 37 mm. Greutate netă (net weight). 240 gr.
Cleste ampermetric UT-203	Husă inclusă (included protective bag). DC Voltage: 400mV / 4V / 40V / 400V / 600V - best accuracy: +/- (0.8%+1) AC Voltage: 4V / 40V / 400V / 600V - best accuracy: +/- (1%+5) DC Current: 40A / 400A - best accuracy: +/- (2%+3) AC Current: 40A / 400A - best accuracy: +/- (2.5%+5) Resistance: 400 Ohm / 4 kOhm / 40 kOhm / 400 kOhm / 4 MOhm / 40 MOhm -best accuracy: +/- (1%+2) Frequency: 10Hz - 1MHz - best accuracy: +/- (0.1%+3) Duty cycle: 0.1% ~ 99.9%. Dimensiuni (dimensions): 210 x 75.6 x 30mm. greutate (net weight): 200gr.
Cleste ampermetric UT-204	Husă inclusă (included protective bag). Calcul rădăcină pătrată medie (true-RMS). DC Voltage: 400mV / 4V / 40V / 400V / 600V - best accuracy: +/- (0.8%+1) AC Voltage: 4V / 40V / 400V / 600V - best accuracy: +/- (1%+5) DC Current: 40A / 400A - best accuracy: +/- (2%+3) AC Current: 40A / 400A - best accuracy: +/- (2.5%+5) Resistance: 400 Ohm / 4 kOhm / 40 kOhm / 400 kOhm / 4 MOhm / 40 MOhm - best accuracy: +/- (1%+2) Frequency: 10Hz - 1MHz - best accuracy: +/- (0.1%+3) Duty cycle: 0.1% ~ 99.9%. Dimensiuni (dimensions): 210 x 75.6 x 30mm. greutate (net weight): 200gr.